Mon–Fri 8am–5pm · Emergency call-outs available
info@btdplumbingheating.co.uk 07920 042880
BTD Plumbing & Heating
07920 042880Request a Quote
Serving Lyneham, Wiltshire

Plumber & Boiler Engineer in Lyneham

A few miles from our Broad Town base. Ex-RAF housing, village homes and rural properties all covered, gas and oil, servicing to full installation.

Gas Safe 529962 · OFTEC C11108 · 18 years' experience

Local to Lyneham

Why we're the sensible local choice for Lyneham

Lyneham is a regular run for us. The village mixes former RAF quarters, private housing and rural surrounds around Bradenstoke and Preston, every one of them a different heating challenge. Being close by in Broad Town, we're a natural choice for Lyneham homes that want a proper engineer without a corporate markup.

Back to home
Distance from our base
Approximately 3 miles west of our Broad Town workshop. Base address: Pye Lane, Broad Town, Swindon, SN4 7RR.
The character of Lyneham
Lyneham has a distinctive character shaped by decades as an RAF station. Alongside the recognisable service-era housing you have pockets of newer development, older village homes at Bradenstoke and outlying farms towards Clack. Some streets are on mains gas, others rely entirely on oil or LPG; we cover the lot.
Property types we work on here
Ex-service homes often have heating layouts that never quite fit modern life, small combi boilers pushed too hard, or old system boilers with tired cylinders. Village and rural properties around Lyneham tend to be oil, with Grant, Worcester and Firebird boilers being the common pattern.
Postcodes covered
SN15 and surrounding lanes.
Services in Lyneham

Everything we do, available here

Lyneham has a mix of mains gas in built-up areas and oil on the rural fringes; we cover both. Every service linked below is delivered by the same engineer.

All services
Green floor-standing oil boiler installed in a utility room with insulated copper flow and return pipework, system filter and flue
Oil Boiler Servicing

Full annual OFTEC service, clean, test and honestly assessed.

Oil boiler burner assembly with pressure gauge and diagnostic tools during a repair
Oil Boiler Repairs

Diagnostics and repairs on every UK oil boiler brand.

New floor-standing oil boiler installed alongside an external bunded green oil storage tank at a rural British home
Oil Boiler Installation

New oil boiler installations, planned and commissioned properly.

Ideal Classic gas boiler with front panel showing gauges and controls above a manifold of copper pipework, system filter and isolation valves
Gas Boiler Servicing

Manufacturer-standard gas servicing, Gas Safe registered.

Detailed copper pipework, cylinder and wall-hung gas boiler mid-repair with system filter and motorised valves
Gas Boiler Repairs

Gas boiler diagnostics and repairs, done once and done right.

Wall-hung gas boiler with front panel removed showing internals, alongside an unvented cylinder and copper pipework in a domestic airing cupboard
Gas Boiler Installation

New gas boiler installations with proper flushing and filters.

Complete central heating plant board with unvented cylinder, low-loss header and zoned pump group
Central Heating Systems

Full central heating systems, upgrades and radiator work.

Copper pipework being brazed in situ beneath floor joists during an underfloor heating first-fix
Underfloor Heating

Wet UFH, new build and retrofit.

Power-flushing machine connected via red hoses to a wall-hung boiler for a full central heating system flush
Power Flushing

Proper power flushing that shifts sludge, not chemical dosing alone.

Domestic water softener with black control head and brine tank installed in a utility cupboard with braided flexi hoses and copper pipework
Water Softener Installation

Water softener installation for hard-water Wiltshire homes.

Wet underfloor heating pipe loops laid in aluminium spreader plates between floor joists during a plumbing first-fix
General Plumbing

Everyday plumbing, leaks, taps, cylinders and pipework.

Modern bathroom with bath, chrome towel radiator, basin vanity and toilet fitted beneath a bright window
Bathroom & Kitchen Plumbing

Bathroom and kitchen plumbing; the plumbing side of any refit.

Why Lyneham chooses BTD

Concrete trust, not marketing fluff

Local, not national

Three miles from Lyneham to our workshop. No sub-contracted engineer arriving in an unbranded van.

Gas + oil in one call

Gas Safe 529962 and OFTEC C11108 under the same roof.

One person accountable

Ben Davis runs BTD Plumbing & Heating single-handedly from Pye Lane, Broad Town, no call centres, no subcontractors and no handoffs. Every enquiry is answered by the engineer who'll be turning up in the van.

  • Gas Safe 529962
  • OFTEC C11108 (Technician 28212)
  • 18 years' experience
  • No subcontractors, Ben on every job
Problems we see in Lyneham

What actually goes wrong around here

Local property, local climate, local infrastructure, every area has its own pattern of faults. Here's what we deal with regularly in Lyneham.

Undersized combis in family homes

A combi that was fine for a couple struggles with three showers and a dishwasher. We advise honestly on whether an upgrade or system change is actually needed.

Poorly commissioned oil installs

We see boilers set up on the wrong nozzle or pump pressure, burning fuel inefficiently for years. A proper service resets it.

Cold radiators in older properties

Usually sludge, air or a stuck valve rather than a boiler fault. We diagnose before quoting for anything major.

Leaking pipework in kitchens and bathrooms

Common in refurbished ex-service kitchens. We track and fix properly.

Our process

The same five steps on every job

  1. Step 1
    Get in touch

    Ring or email | you'll speak to Ben, not a booking line.

  2. Step 2
    On-site diagnosis

    We survey properly rather than guessing over the phone.

  3. Step 3
    Straight quote

    A clear written quote with no surprise extras.

  4. Step 4
    Clean work on site

    Dust sheets, tidy pipe runs, doors shut behind us.

  5. Step 5
    Full handover

    System explained, paperwork completed and registered.

FAQs, Lyneham

Local questions, straight answers

Can't see yours? Ring, Ben answers directly.

Call 07920 042880
Yes: both are within our regular working area.
Nearby areas

We also cover

All service areas
Broad Town
0 miles, our workshop is on Pye Lane, SN4 7RR
Royal Wootton Bassett
Approximately 3 miles north of our Broad Town workshop
Calne
Approximately 7 miles from our Broad Town workshop
Yatesbury
Approximately 4 miles from our Broad Town workshop
Zoned central heating manifold with low-loss header and multiple circulator pumps installed by BTD
Free written quote · no pressure

Book your Lyneham job with BTD

Ring or email, you'll get the engineer, not a call centre. Straight quote, no upsells, work booked in around you.

07920 042880Request a Free Quote
Call NowRequest Quote