Open 24/7 · 7 days a week

 info@btdplumbingheating.co.uk 07920 042880

HomeAboutServices 

Service Areas 

Our WorkReviewsContact07920 042880

OFTEC C11108 | Grant UK G1 approved

# Oil Boiler Installation in Wroughton
From the village itself out to Overtown, Hackpen and the downland farms, we design, supply, install and commission oil-fired heating, including the tank, fuel line and controls that most quotes leave out.

Request a Free Quote  07920 042880

OFTEC C11108, technician 28212 | Grant UK G1 approved | 18 years on the tools, one engineer throughout

- Home
- Services
- Oil Boiler Installation
- Wroughton
- C11108

OFTEC business

- 28212

OFTEC technician

- G1 approved

Grant UK

- 18 years

Experience

- Always free

Written quote

Oil Boiler Installation | Wroughton

## Why Wroughton households call us for this
Wroughton is a village of two halves when it comes to heating. Much of the built-up core has mains gas, but climb towards Overtown, Hackpen and the properties spread along the downland lanes and you are firmly in oil country. Those homes are typically older, larger and more exposed, which makes getting the installation right far more important than simply swapping one appliance for another.

BTD Plumbing &amp; Heating is OFTEC registered (business C11108, technician 28212) and a Grant UK G1 approved installer. Ben Davis carries out every installation personally, with 18 years&#x27; experience across oil, gas and plumbing, so there are no subcontractors and no handovers between trades.

Our quotes cover the whole job: heat loss assessment, boiler specification and position, tank condition and siting, fuel line and fire valve, system cleansing, filtration, controls and commissioning paperwork.

Prefer the county-wide picture first? Read our full oil boiler installation guide, then come back here for the Wroughton specifics.

 Based in Broad Town, near Royal Wootton Bassett Gas Safe 529962 OFTEC C11108

Manufacturer accredited

## Grant UK G1 Approved Installer, fitting oil boilers in Wroughton
Our Grant UK G1 approval is the reason most of our Wroughton oil work is Grant kit. On the older stone and brick properties climbing towards Barbury and the plots off Ellendune and Overtown Hill, boiler siting, flue routes and tank runs all need thinking about individually, and G1 assessment covers exactly that standard of install work.

Every eligible Grant boiler fitted in Wroughton is registered for Grant&#x27;s extended manufacturer guarantee at commissioning, and serviced by the same engineer who installed it, which keeps the guarantee valid without you having to arrange a separate contract.

- New installations &amp; replacements
- Annual servicing &amp; maintenance
- Extended manufacturer guarantees on eligible models
- Installed to Grant UK&#x27;s exact specifications

Local detail

## Wroughton, specifically

Exposed downland properties

Homes above Wroughton towards Overtown and Hackpen sit high and exposed. Heat loss is higher than a comparable house in a sheltered village centre, and boiler sizing needs to reflect that. Equally, external installations and tanks in these positions need proper thought about wind-driven rain, frost and condensate routing, which is where generic quotes tend to come unstuck.

Mixed period and post-war housing

The village runs from period stone and brick properties around Church Hill and the High Street, through substantial post-war family homes, to converted farm buildings and newer plots on the outskirts. Pipework in the older stock is often a patchwork of microbore and 15mm added over decades, and that has a real effect on how a modern condensing boiler performs.

Hard water and system contamination

Wroughton&#x27;s chalk-fed supply leaves scale, and decades-old radiator circuits leave magnetite. Between them they will wreck a new condensing oil boiler&#x27;s heat exchanger if the system is not cleansed first. Every installation we carry out includes a proper cleanse, inhibitor and a magnetic filter, and we will recommend a full power flush where the system warrants it.

What goes wrong here

## The faults we see most in Wroughton

Old boilers limping through winter

Repeated lockouts, sooting and rising oil consumption usually mean an appliance at the end of its life. We give a straight opinion on repair versus replacement rather than automatically selling a new boiler.

Tanks past their service life

Split plastic, corroded steel, sinking bases and tanks sited too close to buildings are all common around the village fringe. Tank replacement is priced honestly alongside the boiler.

Condensate freezing in exposed positions

A poorly routed condensate pipe on a high, exposed Wroughton property will freeze and lock the boiler out in the coldest week of the year. Correct sizing, insulation and internal termination where possible prevent it.

Undersized radiators after a boiler swap

Fitting a condensing boiler onto radiators sized for a 1980s system means it rarely condenses. We check the emitters and flag what actually needs upgrading.

How it works

## From first call to handover in Wroughton

- Step 1

Survey the property

Heat loss, existing pipework, radiator sizing, hot water demand, flue routing, tank condition and access, all assessed on site.

- Step 2

Free written quote

A specified proposal covering boiler, tank, fuel line, controls, cleansing and filtration with one clear total.

- Step 3

Install

Old appliance stripped out, new boiler positioned and piped, flue and condensate routed for an exposed site, fire valve and filter fitted.

- Step 4

Cleanse and dose

System cleansed, inhibitor added and a magnetic filter installed to keep the new heat exchanger clean.

- Step 5

Commission and register

Combustion analysed and set, OFTEC paperwork completed, Grant guarantee registered where eligible, and controls demonstrated before we leave.

Why BTD

## What Wroughton customers actually get

Grant UK G1 approved installer

Eligible Grant Vortex installations can be registered for Grant&#x27;s extended 10 year guarantee.

Oil is core work, not occasional

OFTEC C11108 and technician 28212, with oil-fired heating forming a large part of our week across rural north Wiltshire.

One contract, one engineer

Boiler, tank, pipework, controls and commissioning handled by the same person from survey to handover.

Aftercare from the installer

Annual servicing and any warranty attention comes from Ben, not a rota of unfamiliar engineers.

In detail

## Oil Boiler Installation in Wroughton, properly explained
The technical decisions behind a Wroughton job done once and done right.

### Sizing for an exposed site
Heat loss on a detached property above Wroughton is materially different to the same floor area in a sheltered terrace. We calculate rather than estimate, because an oversized boiler short-cycles, wastes oil and shortens its own life, while an undersized one never recovers the property on a cold morning. The calculation also informs whether existing radiators can deliver the required output at condensing flow temperatures.

### Internal, external or outbuilding
External boilers are popular where utility space is tight, and they simplify flue and combustion air. Internal installations keep the appliance protected and make condensate routing easier. Outbuilding and boiler house installations suit farm properties around Overtown. Each has consequences for noise, frost protection, servicing access and pipe runs, and we set them out at survey stage.

### Tank replacement and OFTEC siting
Where a tank needs replacing we specify to current OFTEC guidance: adequate fire separation from buildings and boundaries, appropriate bunding, a level base sized for the tank, and a fill point that a delivery tanker can actually reach. Doing tank and boiler together avoids paying twice for isolation, draining and commissioning.

### Controls that let the boiler condense
A modern oil boiler paired with sensible controls, proper zoning, a programmable room thermostat and correctly set flow temperatures, delivers noticeably lower running costs than the same appliance on a legacy time clock. We specify controls as part of the installation rather than treating them as an afterthought, and explain how to use them at handover.

### Commissioning, documentation and servicing
Every boiler is set with a flue gas analyser and documented on OFTEC commissioning paperwork. We register the appliance with the manufacturer, register the Grant guarantee where applicable, and set out the annual service requirement clearly, since manufacturer guarantees depend on it being kept up.

FAQs, Wroughton

## Straight answers
Can&#x27;t see your question? Ring, Ben answers the phone himself.

 Call 07920 042880

Do you install oil boilers in Wroughton?Yes, throughout the village and out to Overtown, Hackpen and the surrounding downland properties and farms.

Are you OFTEC registered?

What is the Grant G1 scheme?

Can you replace my oil tank at the same time?

My condensate pipe keeps freezing, can that be fixed on a new install?

Should I repair my old boiler or replace it?

How disruptive is the installation?

Do you flush the heating system?

How do I get a price?

 Free written quote · no pressure

## Planning a new oil boiler in Wroughton?
Book a survey with an OFTEC registered, Grant G1 approved installer and get a free written quote covering boiler, tank and controls.

 07920 042880Request a Free Quote 

Related

## More of what we do

All services in Wroughton 

Oil Boiler Installation

Oil Boiler Servicing

Oil Boiler Repairs

Water Softener Installation

Oil-fired heating specialists and fully qualified gas engineers, serving Broad Town and rural Wiltshire since 2007.

 Leave a review

### Services

- Oil Boiler Servicing
- Oil Boiler Repairs
- Oil Boiler Installation
- Gas Boiler Servicing
- Gas Boiler Repairs
- Gas Boiler Installation
- Water Softener Installation
- Central Heating Systems
- All services →

### Service Areas

- Broad Town
- Royal Wootton Bassett
- Broad Hinton
- Lyneham
- Wroughton
- Marlborough
- Yatesbury
- Swindon
- Calne

### Contact

- 07920 042880
- info@btdplumbingheating.co.uk
- Pye Lane, Broad Town, Swindon, SN4 7RRGas Safe Reg. 529962

OFTEC Reg. C11108 · Tech. 28212

City &amp; Guilds Qualified

Grant UK G1 Approved Installer

© 2026 BTD Plumbing &amp; Heating. All rights reserved.

AboutContactPrivacyTermsCookiesOpen 24/7 · Mon–Sun

 Call NowRequest Quote